Dynamic QR codes: change them after printing

Get a dynamic QR code for any short link, change its destination after printing, add your logo and see every scan. On every Brevily plan.

On this page
  1. How a dynamic QR code works
  2. Get the QR code for a link
  3. Styling the codes
  4. Change a QR code's destination after printing
  5. Track QR code scans
  6. Before you print
  7. Common questions
  8. Next steps

A dynamic QR code is a link people can point a phone at: a permanent way into your site from a poster, a menu, a product box, a slide or a web page. Every link you create in Brevily comes with a QR code ready to download, on every plan. The code itself never changes, but you can change where the QR code leads after printing. Update the destination whenever you need to (how often depends on your plan), and every printed copy follows.

That opens up a lot. One code on a box can run a summer offer, then a winter one, then the product manual, with no reprint. A poster can send iPhones to the App Store and Android phones to Google Play. And every scan that opens the link shows up in your stats, so you can see which poster is pulling its weight.

Before you start: a QR code belongs to a short link. No link yet? Start with how to create a short link; the code is ready the moment the link is.

How a dynamic QR code works

A static QR code holds the final web address, so if the page moves, the print is wasted. A Brevily code holds your short link instead, such as go.example.com/menu. When someone points a phone at it:

  1. The camera reads the short link. Nothing is counted yet: a code that is scanned but never opened leaves no trace.
  2. The person taps to open it, and the phone asks Brevily for the link.
  3. Brevily counts the visit as a QR scan and sends the phone on to the destination.

Scans are marked apart from people tapping the same link elsewhere, so you can tell print from everything else.

  1. Open Links in the console and choose the link.
  2. Open its QR code tab. You'll see the code, how often it has been scanned, and a short Before you print list.
  3. Choose Download SVG for anything printed: it stays sharp at any size. Choose Download PNG for screens, slides and documents.

[screenshot: a link's QR code tab, the preview with its two downloads and Before you print]

Styling the codes

A plain black-and-white code works everywhere. On plans with styled codes (see pricing), you can make it look like part of your brand. Open a link's QR code tab and use the Style panel; the preview changes as you go.

  • Pick your colours. Choose a colour for the code and one for the background, or make the background see-through so the code sits on your design. As you pick, Brevily tells you whether the pair will scan well, and it won't save a pair phones can't read.
  • Choose the shape. Square, rounded or dots. The three big corner squares keep their shape whatever you pick, because that's how phones find the code.
  • Add your logo. Upload a square logo once for your whole organisation, in Settings › General › Logo in QR codes, then switch it on for any link. It sits in the middle, and the code still scans.
  • Set the margin. The clear space around the code. The standard suits most print; give it more room if it sits close to other artwork.

[screenshot: the Style panel with a logo on, the preview and "scans well" showing]

Happy with it? Choose Save style, and both downloads use it. Changed your mind? Back to plain undoes it.

Using your logo? Download the SVG. The PNG always leaves the logo out to keep the code whole; the SVG carries it.

Change a QR code's destination after printing

The print stays the same; what's behind it changes:

  • Edit it now. On the link's page, choose the pencil (Edit details) and change the Destination. Scans go to the new page within a few minutes. Each change counts towards your plan's destination edits.
  • Schedule it. Set a new destination to take over on a date: next season's menu, a launch page. See scheduled destination changes.
  • Route it. Send iPhones, Android phones or another country to different pages from the same code. See targeting rules.

To retire a printed code, disable the link. On your own domain, a late scan can land on a page you choose instead of an error (see own domain for short links).

Track QR code scans

A scan that opens the link is a click like any other, with its country, device and browser, marked as a QR scan. Find them on the link's Overview (QR scans), on its Clicks tab (filter Source by QR), and across all your links in Traffic.

Which poster works? Give each its own link. More in link stats and what Brevily counts as a click.

Before you print

  1. Download the SVG. It stays sharp at any size and carries your logo.
  2. Print it at least 25 mm wide, with the margin around it clear.
  3. Dark code, light ground, never over a photo.
  4. Put the short link in text beside it, so people without a camera handy can type it.
  5. Scan the printed proof at its real size before the full run.

Careful with end dates: an expiry date or a click limit on a printed link ends it while the print is still out there. See link expiry and click limits.

Common questions

Does scanning a Brevily QR code count as a click?

Yes, once the phone opens the link; the camera reading the code tells Brevily nothing. That visit is a click, marked as a QR scan.

Do I need to reprint a QR code when the page changes?

Don't panic: no. The code holds the short link, which never changes. Change the destination, and within a few minutes scans go to the new page.

Do Brevily QR codes expire?

Not on their own. A code works for as long as its short link does, unless you give the link an expiry date or a click limit, or disable it.

Next steps

All how-to guides

Brevily is invite-only, for now

Say what you would use it for and a person replies. Already invited? Sign in.